Bin Status Dashboard
View registered bins, current conditions, alerts and device-health information.
Waste Management
Live
Route Tracking
Optimized
Pick-Ups
Connected
Sensors
Lower
Operating Costs
Connected Waste Operations
Turn Bin Conditions into Collection Work
Smart waste-bin monitoring allows operators to check bin conditions remotely instead of relying only on fixed collection schedules or manual inspections.
Compatible smart-bin sensors monitor fill conditions, high temperature, tilt and battery status. Sensor information is transmitted through supported IoT connectivity to Autonautics, giving operational teams centralised visibility, alerts and collection-workflow support.
Anstel integrates and supports the devices, connectivity and Autonautics platform required for the deployment.
The Challenge
Collection Teams Need Information Before Problems Escalate
Waste collection becomes harder when bin conditions, vehicle locations and collection work remain disconnected. Teams may respond too late, visit locations unnecessarily or discover service issues only after someone reports them.
Identify, Schedule, Collect
From Sensor Reading to Completed Collection
-
Monitor the Bin
A compatible smart-bin sensor measures the condition inside the bin and checks temperature, orientation and battery status at configured intervals.
-
Send Data to Autonautics
The compatible smart-bin sensor sends information through a supported IoT network to Autonautics.
-
Alert the Control Room
Autonautics presents the bin status and generates an alert when a configured condition requires attention.
-
Locate a Collection Vehicle
Operators can review live vehicle locations and identify an appropriate truck or field team.
-
Schedule the Job
The control-room team can create a collection job, assign it to a driver and provide the required location and task information.
-
Monitor Completion
Operators can follow vehicle movement and job status until the collection has been completed or requires further action.
Connected Sensor Data
Monitor the Conditions That Affect Collection Operations
Fill Condition
An ultrasonic sensor measures the distance between the sensor and the waste surface. Autonautics can translate this measurement into a bin condition after the sensor has been configured for the bin.
High Temperature
An internal temperature sensor can generate an alert when the configured temperature threshold is exceeded. This helps the control-room team investigate a potential fire or abnormal heat condition.
Tilt or Fall
A three-axis accelerometer can detect when the bin moves beyond its configured angle. The resulting alert may indicate that the bin has fallen, moved or requires inspection.
Battery and Device Health
Low-battery alerts help teams plan sensor maintenance. Periodic device reports also help confirm that the sensor remains connected and operational.
Optional Location
Selected sensor variants can include GPS. Standard sensors can use the registered installation location assigned to the bin within the platform.
One Operational View
Connect Bins, Vehicles and Collection Work
Autonautics brings sensor information and collection operations into one environment, helping teams move from awareness to action without relying on disconnected calls and spreadsheets.
Bin Map
See monitored bins at their registered locations and identify which locations require attention.
Vehicle Visibility
Review the live location and operational status of compatible collection vehicles.
Collection Scheduling
Create collection jobs, assign drivers and organise work according to current operational priorities.
Job Progress
Monitor whether a collection job is pending, assigned, in progress or completed.
Operational History
Review sensor events, collection activity and completed work to understand recurring service requirements.
Where It Can Be Used
Flexible Monitoring for Distributed Bin Networks
The Autonautics smart waste solution can support organisations responsible for bins and collection vehicles across multiple locations.
Municipal and Public Spaces
Monitor bins positioned across streets, parks and other public areas.
Commercial Waste Operations
Coordinate scheduled and condition-based collections across customer locations.
Recycling Collection
Monitor recycling bins and coordinate vehicles across distributed collection points.
Industrial and Managed Sites
Connect bins and collection operations across campuses, facilities and controlled operating areas.
Operational Outcomes
Improve Visibility and Collection Coordination
Earlier Awareness
Identify full-bin, high-temperature, tilt and low-battery conditions without waiting for a manual report.
Better Prioritisation
Use current bin conditions to determine which locations require attention first.
Faster Coordination
Connect control-room alerts with vehicle visibility and job scheduling.
Fewer Unnecessary Checks
Use remote sensor information to reduce avoidable physical inspections.
Clearer Job Progress
Follow assigned collection work from scheduling through completion.
Better Operational Planning
Use historical events and collection records to understand recurring demand and service patterns.
Delivered by Anstel
Sensor, Connectivity and Platform Configuration
An effective smart-bin deployment depends on correct sensor installation, calibration, connectivity and platform configuration.
Anstel helps organisations select compatible sensors and connectivity based on the bin type, installation environment, network availability and operational requirements.
Device Configuration
Register sensors, assign them to bins and configure the required monitoring thresholds.
Installation and Calibration
Position each sensor correctly and calibrate its fill condition according to the bin’s dimensions and operating environment.
Connectivity Planning
Select supported IoT connectivity and assess network availability for the deployment area.
Platform Onboarding
Configure dashboards, alerts, user access and collection workflows within Autonautics.
Operational Support
Support the connected devices and platform as the monitored bin network expands.
Connected Products and Solutions
One Platform Supporting the Complete Response
Autonautics Connected Monitor
Receives information from compatible smart-bin sensors and presents it through operational dashboards and alerts.
Connected Fleet
Provides live visibility into collection vehicles, drivers, journeys and fleet activity.
Job Scheduling
Allows control-room teams to create, assign and monitor collection jobs.
Asset Management
Maintains operational records for bins, sensors and other connected assets.
Alerts and Notifications
Notifies the appropriate team when a monitored condition requires attention.
Reports and Analytics
Provides visibility into sensor events, collection work and operational patterns.
FAQ
Frequently Asked Questions
Smart waste-bin monitoring uses connected sensors to report bin conditions remotely. Autonautics receives the sensor information and presents it through dashboards, maps and operational alerts.
A compatible sensor can monitor the distance to the waste surface, internal temperature, tilt angle, battery condition and device connectivity. Available measurements depend on the selected sensor model and configuration.
An ultrasonic sensor measures the space between the sensor and the waste surface. The configured threshold and bin dimensions determine when Autonautics presents the bin as requiring collection.
The sensor can generate a high-temperature alert when its configured threshold is exceeded. The alert can indicate a possible fire or abnormal heat condition that requires investigation. It does not replace approved fire-detection or emergency systems.
A tilt sensor can detect when the bin moves beyond its configured angle. This may indicate that the bin has fallen, moved or been disturbed, allowing the control-room team to investigate.
No. GPS is available only on selected sensor variants. Standard sensors can appear on the Autonautics map using the registered location assigned during installation.
When a bin requires attention, the control-room team can review nearby collection vehicles, create a job in Autonautics Job Scheduling and assign it to an appropriate driver or team.
Yes. Operators can monitor the assigned vehicle’s movement and review the collection job’s status until it has been completed or marked for further action.
Compatible smart-bin deployments can use LoRaWAN connectivity where suitable gateway coverage and the correct regional frequency configuration are available. Anstel selects the appropriate sensor and connectivity method based on the site, hardware and operational requirements.
Yes. Fill, temperature and tilt thresholds can be configured according to the selected sensor and deployment requirements. Fill detection should be calibrated for the dimensions and installation position of each bin type.
Anstel configures and supports the compatible sensors, connectivity and Autonautics platform used for the smart waste deployment.
Smart Waste Deployment
Connect Your Bins with Your Collection Operation
Show Anstel how your bins, vehicles and collection teams currently operate. We will demonstrate how compatible sensors, Autonautics Connected Monitor, Connected Fleet and Job Scheduling can bring the operation into one connected workflow.
