If your business sends, schedules, loads, receives or operates heavy vehicles in Australia, chain of responsibility applies to you, even if you never drive a truck. This guide explains what it means under the Heavy Vehicle National Law (HVNL), who it applies to, what changed when the law was reformed on 1 August 2026, and how telematics records help you manage the risks.
General information, not legal advice. Your obligations depend on your operation. Check the details with the National Heavy Vehicle Regulator (NHVR) or your adviser. Last reviewed 19 November 2026.
What Chain of Responsibility Means
A heavy vehicle can be unsafe for reasons the driver doesn’t control: a delivery window that can only be met by speeding, a roster that leaves no time for rest, a load that was packed badly, or a truck that missed its service. Chain of responsibility (CoR) recognises this. It puts safety duties on every party whose actions or decisions influence how a heavy vehicle is driven, loaded and maintained.
The practical effect is that safety is a business duty, not only a driver’s. If a breach happens because of how work was planned, contracted or paid for, the people who made those decisions can be responsible too.
Where the HVNL Applies
The NHVR administers one set of laws for heavy vehicles over 4.5 tonnes gross vehicle mass. It is made up of the Heavy Vehicle National Law, which is the schedule to the Heavy Vehicle National Law Act 2012 (Qld), and five sets of national regulations covering fatigue management, mass, dimension and loading, registration, vehicle standards and general matters.
- Where it applies: the HVNL commenced on 10 February 2014 in the Australian Capital Territory, New South Wales, Queensland, South Australia, Tasmania and Victoria. Each passed a law adopting it, some with local modifications.
- Western Australia and the Northern Territory: the HVNL has not commenced there, and they have their own laws. But it applies to WA and NT vehicles once they cross into a state or territory where it does apply, and drivers may need to meet some requirements, such as work diary rules, before they cross the border.
- Private roads: in some cases the HVNL also applies to heavy vehicle activity on private roads, although access to private roads such as mine sites is managed by the road owner.
Who Is in the Chain
The parties in the chain of responsibility include:
- Employers of heavy vehicle drivers
- Prime contractors who engage drivers
- Operators who control or direct the use of heavy vehicles
- Schedulers who set the timetables and routes
- Consignors and consignees who send and receive goods
- Loading managers, loaders and unloaders who manage, pack and unload goods
Owner drivers are chain of responsibility parties. Employed drivers are not, although they still have their own duties as drivers under the HVNL. One business can hold several roles at once: a distributor might be the consignor, the scheduler and the operator of its own trucks.
The Primary Duty and Executive Due Diligence
Under the primary duty, which has applied since October 2018, each party in the chain must ensure, so far as reasonably practicable, the safety of its transport activities involving heavy vehicles. There is only one primary duty and every party shares it. What differs is how each party contributes, because they do different things at different times and places. “Reasonably practicable” means doing what can reasonably be done, considering the risk, how likely it is, how serious the harm could be, and what is available to reduce it.
Executives, meaning the directors and senior managers who make decisions for the business, have a separate due diligence duty: they must take reasonable steps to make sure the business meets its safety duties. The NHVR notes that the two duties overlap a lot in practice. An effective safety management system, for example, can be evidence of both. An executive who fails to exercise due diligence can face the same penalty as an individual who breaches the primary duty.
Penalties depend on the seriousness of the breach and are set in the HVNL. Check the current figures with the NHVR rather than relying on older guides.
What Changed on 1 August 2026
The HVNL was reformed on 1 August 2026. According to the NHVR, the changes include:
- A new Heavy Vehicle Accreditation scheme. If you hold accreditation under the previous scheme (NHVAS), check how and when it transitions.
- Updated fatigue requirements. Review your rosters, fatigue policies and any fatigue accreditation against the new rules.
- Simplified work diary record-keeping. Check what your drivers now need to record and keep.
- Changes to mass, dimension and loading provisions. Check whether your vehicle combinations, permits or loading practices are affected.
The NHVR publishes the detail of each change in its HVNL and regulations pages and its HVNL reform implementation guidance, including guidance on the rules about driving while unfit. If your policies were written before August 2026, now is a good time to review them.
The 2026 Master Code and Other New Guidance
Alongside the law changes, the NHVR has published guidance that helps businesses put the primary duty into practice.
- The 2026 Master Code. In operation from 1 August 2026, the Master Code gives guidance on managing hazards and risks, risk assessments and risk controls. It has moved from a role-based structure to an activity-based one, focused on the risks of each transport activity rather than job titles. It describes 45 activities, such as recruitment, procurement, scheduling, loading, premises management and vehicle maintenance, and more than 500 controls.
- Accreditation audits. The NHVR has published a National Audit Standard that sets out how accreditation audits are carried out and reported, as operators move to the new Heavy Vehicle Accreditation scheme.
- Special purpose vehicles. A new national exemption notice for Class 1 special purpose vehicles up to 40 tonnes total mass, such as certain cranes and concrete pumps, commenced on 16 August 2026, with an operator’s guide. Check the NHVR’s national notices for the conditions and where it applies.
What the Master Code is, and isn’t
- It doesn’t create new obligations. The controls are recommendations, not obligations. There is no offence for failing to implement an individual control, and a business can’t be prosecuted for “failing to comply with the Code”.
- It can be used as evidence. If a party or executive is charged with breaching the primary duty or the executive duty, the Code can show what they knew, or ought to have known, about hazards, risks and controls. It would be one piece of evidence among many.
- You choose the controls that fit. No single business would apply all 500 controls, and you can use alternative controls not listed in the Code, as long as they are equally effective.
- It isn’t an audit tool. The NHVR doesn’t endorse any audit scheme for the Code and doesn’t accredit Master Code or CoR auditors. If you audit, audit the measures you have chosen, not the whole Code.
A practical way to use it: pick the activities your business actually does, compare the listed controls with what you already have, and record why you chose the controls you use. The NHVR’s Master Code Filter tool and Risk Register Builder help with this, and its recorded webinars cover chain of responsibility basics, human factors such as fatigue, distraction and driver health, and how to apply the Code.
How Telematics Records Help
Managing chain of responsibility comes down to knowing your risks, acting on them and being able to show what you did. A fleet telematics platform such as Autonautics gives you accurate, time-stamped records instead of paperwork reconstructed after the fact.
- Speed: every trip is recorded with location and speed, and speeding alerts reach supervisors while the vehicle is still on the road.
- Driving and stop times: trip and stop reports show when vehicles were moving and parked, so you can cross-check rosters, schedules and work diaries.
- Schedules that work: actual travel times between depots and customers show whether delivery windows are realistic or push drivers to rush.
- Maintenance: service schedules, defects and odometer readings stay in one place, so vehicles don’t miss a service and you can show your maintenance history.
- Driver behaviour: harsh braking, cornering and acceleration, and AI-Camera events, show where coaching is needed.
Two limits are worth being clear about. A GPS tracking system is not a work diary: where one is required, drivers must use a written work diary or an electronic work diary approved by the NHVR. And records alone don’t make an operation compliant. They help when someone reviews them and acts on what they show.
A Practical Checklist
- List every role your business plays in the chain, such as consignor, scheduler, operator or loader.
- Identify the main risks in each role: speed, fatigue, loading, maintenance and unrealistic schedules.
- Write down how you control each risk, and who is responsible.
- Check your contracts and delivery terms don’t reward or require unsafe behaviour.
- Use telematics data to monitor speed, trip times and maintenance, and review exceptions regularly.
- Train drivers, schedulers and loaders on their part in safety.
- Make sure executives get regular reports and act on them, as part of their due diligence.
- Review your policies against the changes that started on 1 August 2026, and compare your controls with the 2026 Master Code activities you carry out.
Keeping Up: the NHVR Safety Hub
On 18 November 2026 the NHVR launched a Safety Hub for operators, drivers, schedulers and other chain of responsibility parties. It brings together four types of publication:
- Safety Alerts: urgent messages that need immediate action, such as equipment recalls and critical incidents.
- Safety Bulletins: detailed information about significant safety issues, hazards and trends.
- Safety Lessons (new): short, practical lessons from incidents, investigations and operational experience.
- Incident Reviews (new): reviews of significant incidents and what the wider industry can learn from them.
Checking the Hub regularly, and asking what each item means for your own operation, is a simple way to show your safety management is active.
Frequently Asked Questions
What is chain of responsibility?
Chain of responsibility (CoR) is the principle in the Heavy Vehicle National Law that everyone whose actions or decisions affect a heavy vehicle’s safety shares responsibility for it, not only the driver. Each party must do what is reasonably practicable to make its transport activities safe.
Does chain of responsibility apply in Western Australia and the Northern Territory?
The HVNL has not commenced in WA or the NT, which have their own laws. But it applies to vehicles from those jurisdictions once they cross into a state or territory where it does apply, and drivers may need to meet some HVNL requirements, such as work diary rules, before they cross.
Which vehicles does the HVNL cover?
Heavy vehicles over 4.5 tonnes gross vehicle mass, in the ACT, New South Wales, Queensland, South Australia, Tasmania and Victoria.
What changed on 1 August 2026?
The HVNL reforms introduced a new Heavy Vehicle Accreditation scheme, updated fatigue requirements, simplified work diary record-keeping and changes to mass, dimension and loading provisions. The NHVR’s HVNL reform implementation pages explain each change.
What is the 2026 Master Code?
It is NHVR guidance, in operation from 1 August 2026, that helps chain of responsibility parties meet their primary duty. It is organised around 45 transport activities and more than 500 recommended controls. The controls are not legal obligations and a business can’t be prosecuted for not following the Code, but it can be used as evidence of what a business knew or ought to have known.
Are drivers chain of responsibility parties?
Owner drivers are. Employed drivers are not, although they have their own duties as drivers under the HVNL. The Master Code is aimed at chain of responsibility parties, and many of its recommendations directly benefit drivers.
Can a GPS tracker replace a work diary?
No. Where a work diary is required, drivers must use a written work diary or an electronic work diary approved by the NHVR. Telematics records are useful supporting evidence, but a general GPS tracking system is not a work diary.
Does using telematics make us compliant?
Not on its own. Telematics gives you accurate records of speed, location, trips and maintenance, which help you find risks and show what you did about them. Compliance depends on the systems, decisions and actions of your business.
See Your Fleet’s Records in One Place
Autonautics records speed, trips, stops, driver behaviour and maintenance for every vehicle, with support from our Sydney team. Book a demo to see how it fits your safety systems, or read about fleet tracking in Australia.
















