Wireless 0-20 mA Current Meter

Your price$0.00 /month

wireless 0-20mA current meters are capable of measuring the current off another device or sensor, up to 20mA (DC), by connecting the leads of the sensor to the positive and ground terminals of the device being measured. Examples of interfacing devices include, but are not limited to: Current transducers (CTs) with outputs up to 20 mA, pH sensor, dissolved oxygen sensor, pressure sensor, magnetic flow meters, velocity or acceleration sensors, industrial vibration sensors, industrial accelerometers, any kind of sensor that specifies the output is in (mA) within the range of 0 – 20.

Clear
Compare
SKU: P-128 Categories: ,

Product Description

wireless 0-20mA current meters are capable of measuring the current off another device or sensor, up to 20mA (DC), by connecting the leads of the sensor to the positive and ground terminals of the device being measured. Examples of interfacing devices include, but are not limited to: Current transducers (CTs) with outputs up to 20 mA, pH sensor, dissolved oxygen sensor, pressure sensor, magnetic flow meters, velocity or acceleration sensors, industrial vibration sensors, industrial accelerometers, any kind of sensor that specifies the output is in (mA) within the range of 0 – 20.

Leading Enterprise Grade “Internet of Things” Solutions

sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000 feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors.

  • Coin cell sensors typically last 3 years.
  • AA and Industrial sensors typically last up to 10 years.

ALTA products employ Monnit’s new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

 

Notes:  WARNING: Use caution when interfacing to the Monnit 0-20mA Current meter. Negative voltages, any kind of AC Voltages, or DC Voltage exceeding 3.6V WILL DAMAGE the electronics of the wireless sensor. We  is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.

 

Product Features

  • Interfaces with sensors between 0-20 mA.

* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 

What does this wireless sensor’s data look like in software?

Wireless 0-20 mA Current Meter - Data View in Software

 

What’s in the box?

  • Wireless Sensor
  • CR2032 – Coin Cell Battery
  • Mounting Hardware

Additional information

Format

AA, Coin Cell, Industrial

Frequency

900MHz, 868MHz

Shop By Departments

Wireless 0-20 mA Current Meter

Your price$0.00 /month

Add to Cart